Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
223 = Multi-Core Intel Xeon processor 7xxx Series
224 = Multi-Core Intel Xeon processor 3400 Series
230 = Embedded AMD Opteron Quad-Core Processor Family
231 = AMD Phenom Triple-Core Processor Family
232 = AMD Turion Ultra Dual-Core Mobile Processor Family
233 = AMD Turion Dual-Core Mobile Processor Family
234 = AMD Athlon Dual-Core Processor Family
235 = AMD Sempron SI Processor Family
236 = AMD Phenom II Processor Family
237 = AMD Athlon II Processor Family
238 = Six-Core AMD Opteron Processor Family
239 = AMD Sempron M Processor Family
250 = i860
251 = i960
254 = Reserved (SMBIOS Extension)
255 = Reserved (Un-initialized Flash Content - Lo)
260 = SH-3
261 = SH-4
280 = ARM
281 = StrongARM
300 = 6x86
301 = MediaGX
302 = MII
320 = WinChip
350 = DSP
500 = Video Processor
65534 = Reserved (For Future Special Purpose Assignment)
65535 = Reserved (Un-initialized Flash Content - Hi)
ServiceTag The Service Tag of this system.
Status This property indicates the current status of the logical device.
The following values are defined:
OK
Error
Degraded
Unknown
Pred Fail
Starting
Stopping
Service
Stressed
NonRecover
No Contact
Lost Comm
Stopped
SystemClass This is the system type which is installed and running the instrumentation.
The following values are defined:
1 = Other
2 = Unknown
3 = Workstation
4 = Server
5 = Desktop
6 = Portable
7 = Net PC
SystemDescription Product name for this system.
SystemName The name of this system.
SystemVendor Manufacturer of this system.
COMPONENTS
This section provides information about hardware components of the system such as battery, chassis, disk drive, fan, keyboard, memory, and so on. Table 1-3 lists Dell OMCI Components classes and properties.
Table 1-3: Dell OpenManage Client Instrumentation Components Classes and Properties
Dell_Battery
BatteryStatus Description of the Battery's charge status. Values such as "Fully Charged" (value=3) or "Partially Charged" (11) can be specified. The value, 10, is not valid in the CIM Schema since in DMI it
represents that no battery is installed. In this case, this object should not be instantiated.
The following values are defined:
1 = Other
2 = Unknown
3 = Fully Charged
4 = Low
5 = Critical
6 = Charging
7 = Charging and High
8 = Charging and Low
9 = Charging and Critical
10 = Undefined
11 = Partially Charged
Caption The caption of the device.