Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
4 = Utilities
5 = Do not re-boot
SystemResetBootOptionAtLimit Indicates the action to be taken when the Automatic System Reset Limit is reached.
The following values are defined:
1 = Other
2 = Unknown
3 = Operating System
4 = Utilities
5 = Do not re-boot
SystemResetTimeout This property identifies the number of minutes before the re-boot is initiated. It is used after system power cycle, system reset (local or remote), and automatic system reset. A value of 0x80000000
denotes 'unknown'.
Dell_VideoBIOSElement
Caption The caption of the device.
Description A short description of the device.
IsShadowed If true, indicates that the Video BIOS is shadowed.
Manufacturer Manufacturer of this software element
Name The name used to identify this software element
ReleaseDate The Video BIOS release date.
SoftwareElementID This is an identifier for this software element and is designed to be used in conjunction with other keys to create a unique representation of this SoftwareElement
SoftwareElementState The SoftwareElementState is defined in this model to identify various states of a software elements life cycle.
A software element in the deployable state describes the details necessary to successfully distribute it and the details (conditions and actions) required to create a software element in the
installable state (that is, the next state).
A software element in the installable state describes the details necessary to successfully install it and the details (conditions and actions) required to create a software element in the executable
state (that is, the next state).
A software element in the executable state describes the details necessary to successfully start it and the details (conditions and actions) required to create a software element in the running state
(that is, the next state).
A software element in the running state describes the details necessary to monitor and operate on a started element.
The following values are defined:
0 = Deployable
1= Installable
2 = Executable
3 = Running
TargetOperatingSystem The Target Operating System property allows the provider to specify the operating system environment. The value of this property does not ensure binary executable. Two other pieces of information are
needed. First, the version of the OS needs to be specified. using the OSVersion Check. The second piece of information is the architecture the OS runs on. This information is captured with the
ArchitectureCheckclass. The combination of these constructs allows the provider to clearly identify the level of OS required for a particular software element.
The following values are defined:
0 = Unknown
1 = Other
2 = MACOS
3 = ATTUNIX
4 = DGUX
5 = DECNT
6 = Digital Unix
7 = OpenVMS
8 = HPUX
9 = AIX
10 = MVS
11 = OS400
12 = OS/2
13 = JavaVM
14 = MSDOS
15 = WIN3x
16 = WIN95
17 = WIN98
18 = WINNT
19 = WINCE
20 = NCR3000
21 = NetWare
22 = OSF
23 = DC/OS
24 = Reliant UNIX
25 = SCO UnixWare
26 = SCO OpenServer
27 = Sequent
28 = IRIX
29 = Solaris
30 = SunOS
31 = U6000
32 = ASERIES
33 = TandemNSK
34 = TandemNT
35 = BS2000
36 = LINUX
37 = Lynx
38 = XENIX
39 = VM/ESA
40 = Interactive UNIX
41 = BSDUNIX