Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
VerifySupportedValue This method determines if a particular property/value pair is supported by the system BIOS. A property of the class and a numeric value are passed as arguments to this function. If the property/value
pair is supported by the BIOS, then this method returns 0. If the property/value pair is not supported by the BIOS, then this method returns 1. If the method call fails, then this method returns -1. This
method can only execute on Class (not on instance).
VideoExpansion Enables or Disables Video Expansion.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
VideoMemorySize Sets the Video Memory Size to the given value.
The following values are defined:
1 = Other
2 = Unsupported
3 = Auto
4 = Off
5 = 1MB
6 = 8MB
7 = 16MB
8 = 32MB
9 = 64MB
10 = 128MB
11 = 256MB
12 = 512MB
13 = 1024MB
VTforDirectIO Intel Virtualization Technology for Direct I/O (VT-d) – new chipset feature that enhances I/O support (DMA) when running a Virtual Machine Monitor.
The following values are defined:
1 = Other
2 = Unsupported
3 = Off
4 = On
WakeupOnLAN This property defines whether Wakeup On LAN is disabled, enabled for on-board NIC only or enabled for add-in NIC only. If Enabled with boot to NIC option is selected, the system boots from the NIC
boot-ROM upon a remote wakeup
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = Enabled for add-in NIC
5 = Enabled for on-board NIC
6 = Enabled for all NICs
7 = Enabled with boot to NIC
8 = LAN or WLAN
WakeupOnLANMethod This property defines the Wakeup On LAN method supported by the system.
The following values are defined:
1 = Other
2 = Unsupported
3 = Magic Packet
WatchdogTimer Enables or disables the watchdog timer to reboot or reset the system when the timer expires.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
WiFiCatcherChanges Permits or Denies WiFi Catcher changes. If the administrator password is not set, this setting will have no effect.
The following values are defined:
1 = Other
2 = Unsupported
3 = Permitted
4 = Denied
WiFiLocator Enables or Disables the WiFi Locator.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
WirelessAdapter Enables or disables the wireless adapter.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
WirelessUWB Turns the wireless UWB radio on or off.
Note: This option is applicable only for systems that have a physical Wireless On/Off Switch.
1 = Other
2 = Unsupported