Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
1 = Other
2 = Unsupported
3 = Disable all
4 = Enable all
SATADIPM This property will allow users to disable or enable the feature that allows SATA HDDs to initiate link power management transitions.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SD Card Enable/Disable the SD Card.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SecondaryParallelATAMaster Enables or Disables secondary Parallel ATA master channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SecondaryParallelATASlave Enables or Disables secondary Parallel ATA slave channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
Selective USB Enable Selective USB feature to disable all USB ports, except for the 2 Selective USB ports. This option will allow only keyboard/mouse connected to the Selective USB ports for the boot
process to continue. Disable Selective USB feature to resume normal USB status and normal boot procedure.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SerialATAChannel1 Enables or Disables Serial ATA channel 1.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel2 Enables or Disables Serial ATA channel 2.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel3 Enables or Disables Serial ATA channel 3.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel4 Enables or Disables Serial ATA channel 4.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel5 Enables or Disables Serial ATA channel 5.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel6 Enables or Disables Serial ATA channel 6.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel7 Enables or Disables Serial ATA channel 7.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel8 Enables or Disables Serial ATA channel 8.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialCommunication Sets the Serial Communication.
The following values are defined: