Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
PointingDevice Sets the Pointing Device.
The following values are defined:
1 = Other
2 = Unsupported
3 = External Serial Only
4 = External PS2 Only
5 = Switch to Touchpad
6 = Switch to External PS2
POSTF12KeySettings Enables or Disables the F12 key at POST.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
POSTF2KeySettings Enables or Disables the F2 key at POST.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
POSTHelpDeskKeySetting Enable/disable display of the 'Ctrl+H Help Desk' hotkey message on the post screen if ME is alive and CIRA is supported.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
POSTMEBxKeySetting Enables or Disables POST MEBx Key.
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
PowerManagementSettings This property defines the power management settings.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = Minimum
5 = Regular
6 = Maximum
PrimaryParallelATAMaster Enables or Disables primary Parallel ATA master channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
PrimaryParallelATASlave Enables or Disables primary Parallel ATA slave channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
PrimaryVideo Sets the Primary Video source.
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
PromptOnError Enable/Disable the Prompt on Error.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
RadioTransmission Enables or Disables the radio transmission (MiniPCI Wireless or Bluetooth module).
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
RearSingleUSB Enables or disables rear single USB ports. If disabled, the ports are unusable in all operating systems.
The following values are defined:
1 = Other
2 = Unsupported
3 = Off
4 = On
SATA Controllers Enable/Disable all SATA Controllers.
The following values are defined: