Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
ModuleBayDevice Enables or Disables the Module Bay Device.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
MonitorToggling Enables or Disables Monitor Toggling
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
MultiCore Enables or Disables Multiple CPU Core support on next boot. The Disabled state prevents the OS from seeing additional cores present on a single CPU package. On some Dell systems, the MultiCore
property in the Dell_SMBIOSSettings class displays as enabled or disabled even if the installed processor does not support multi-core technology. In these systems, the MultiCore property is disabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NetworkActivityLED Sets the options to control the activity LED.
Select Network Activity LED Indicator, so that an ACPI OS and driver can control the Activity LED.
Select WLAN Radio On/Off Indicator to set the Activity LED as a wireless LAN radio on/off indicator.
Select Disable Activity LED to switch off the Activity LED.
The following values are defined:
1 = Other
2 = Unsupported
3 = Network Activity LED Indicator
4 = WLAN Radio On/Off Indicator
5 = Disable Activity LED
NMIButton Enables or Disables the NMI Button.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NodeInterleave Enables or Disables Node Interleave.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NoExecute Enables or Disables the No Execute (NX) flag.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NumberOfCoresPerProcessor Rolls the number of enabled cores in each processor. By default, the maximum number of cores per processor will be enabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = 1 Core
4 = 2 Cores
5 = 4 Cores
6 = 6 Cores
7 = 8 Cores
8 = 10 Cores
9 = 12 Cores
10 = All
NumLock Enables or Disables Num Lock.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
Onboard1394 Enables or Disables on-board 1394 controller on next boot.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OnboardModem Enables or Disables the Onboard Modem.
The following values are defined:
1 = Other