Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
2 = Unsupported
3 = Thorough
4 = Minimal
5 = Automatic
HardDriveFreeFallProtection Enables or disables the hard drive free fall protection.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
HardDiskAcousticMode Sets the Hard Disk Acoustic Mode.
The following values are defined:
1 = Other
2 = Unsupported
3 = Bypass
4 = Quiet
5 = Suggested
6 = Performance
HardDiskFailover Specifies which devices in the Hard-Disk Drive Sequence menu are attempted in the boot sequence. When set to OFF, only the first device in the list is attempted. When set to ON, all devices are
attempted in order, as listed in the Hard-Disk Drive Sequence.
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
HardwarePrefetchTrainingOnSoftwarePrefetch Enables or disables the hardware prefetcher to consider software prefetches when strides for prefetch requests are detected.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
HDDProtection Enable/Disable the HDD Protection.
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
HotDocking Enables or Disables warm and hot docking/undocking.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = Enabled
HotkeyToToggleWxANRadio Enables or disables Hotkey to toggle WxAN radio.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
HTAssist Enables or disables the Probe Filter chipset option from the BIOS setup.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
Hyperthreading Enables or Disables hyperthreading on next boot. On some Dell platforms, this property will show Enabled or Disabled despite the platform not supporting hyperthreading. The platforms in question are
those that support Multi-Core processor technology, but do not support hyperthreading. In this case, the property toggles the multi-core capability on and off, rather than hyperthreading.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
IDEController This property defines whether the IDE controller is enabled or disabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = Auto
4 = Disabled
IntegratedAudio Status of the system's built-in sound device.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = Enabled
5 = Auto
IntegratedRAIDController Enables or Disables the Integrated RAID Controller.
The following values are defined: