Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
4 = Disabled
5 = Enabled
6 = Enabled with RPL Boot
7 = Enabled with iSCSI Boot
8 = Enabled with ImageServer Boot
BuiltinPointingDevice This property defines whether the built-in pointing device port is enabled or disabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
BusRatio Bus Ratio.
The following values are defined:
1 = Other
2 = Unsupported
3 = Max
4 = 6.0x
5 = 7.0x
6 = 7.5x
7 = 8.0x
8 = 8.5x
9 = 9.0x
10 = 9.5x
Camera Enables or disables the camera.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
Caption The caption of the device.
CellularRadio Enables or Disables the cellular radio, that is, the WWAN module.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
Charger This property define the charger details.
The following values are defined:
1 = Other
2 = Unsupported
ChassisIntrusion Enables the system to detect and report Chassis Intrusion events to the system display on boot-up.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
5 = Silent Enabled
ChassisIntrusionStatus This property shows the status of the system with regards to Chassis Intrusion (Detected or Not Detected). A value of Unknown indicates one of two things: either Chassis Intrusion is not supported by
this system, or Chassis Intrusion event reporting has been disabled by the user. If the value is Detected, the user may set it to Not Detected to enable the system to receive the next event and to stop
generating events for now.
The following values are defined:
1 = Other
2 = Unsupported
3 = Detected
4 = Not Detected
5 = Clear
ClearSystemEventLog Prevents or causes the system event log to be cleared in the next boot.
The following values are defined:
1 = Other
2 = Unsupported
3 = No
4 = Yes
CoolAndQuiet Enables or Disables AMD Cool and Quiet processor feature.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
CPUVirtualization Enables or Disables CPU Virtualization.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
CStatesControl Enable/Disable the C States Control.
The following values are defined: