Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
1 = Enabled
2 = Unsupported
ReducedCPUClockSpeed Defines whether to enable CPU to slow down when possible
The following values are defined:
1 = Other
2 = Unknown
3 = Enabled
4 = Disabled
SettingID The identifier by which the Setting object is known.
Dell_RemoteFlashBIOSSettings
Caption The caption of the device.
CompletionCode This property defines the completion code of the last BIOS update.
The following values are defined:
1 = Other
2 = Unknown
3 = Completed successfully
4 = Bad Image
5 = Could not access flash
6 = Flash memory not ready
7 = Currently disabled
8 = Battery must be installed
9 = Fully charged battery must be installed
10 = External power adapter must be connected
11 = 12 Volts could not be set
12 = 12 Volts could not be removed
13 = A flash memory failure occurred
14 = A general failure occurred
15 = A data miscompare error occurred
16 = The image could not be found in memory
17 = No update operation has been performed
DellInstanceID This property defines the instance ID of this class.
Description A short description of the device.
EnableUpdate This property is used by Dell OpenManage to enable a Remote Flash BIOS update on the next boot. Dell OpenManage Client Administrator (OMCA) will automatically set this property to Enabled during
remote flash BIOS operations.
The following values are defined:
1 = Other
2 = Unknown
3 = Enable
4 = Disable
LastBIOSUpdate This property defines the date of last BIOS update.
MinimumSizeofContiguousMemory This property defines the minimum size of contiguous memory required for remote BIOS update.
SettingID The identifier by which the Setting object is known.
Support This property defines whether remote flash BIOS updates are supported by this system.
The following values are defined:
1 = This system supports remote flash BIOS update
2 = This system does not support remote flash BIOS update
Dell_SMBIOSSettings
AdminSetupLockout Enables or disables the administrator setup lockout. After enabling this option, a user can see the Setup screens only after providing the correct administrator password. This is applicable only if the
administrator password is set.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
AGPSlot Enables or disables the on-board AGP slot.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
AmbientLightSensor Enables or Disables the Ambient Light Sensor.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
ASFMode Sets the ASF (Alert Standard Format) mode.
The following values are defined:
1 = Other
2 = Unsupported