Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
Description A short description of the infrared controller.
DeviceID An address or other identifying information to uniquely name the logical device.
EnableState Defines whether IR is enabled or disabled
The following values are defined:
1 = Other
2 = Unknown
3 = Enabled
4 = Disabled
LimitSpeedEnable Defines whether IR speed is limited or not.
The following values are defined:
1 = Other
2 = Unknown
3 = Enabled
4 = Disabled
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
PhysicalPortName Defines the physical port that IR is connected to.
ProtocolSupported The protocol used by the Controller to access 'controlled' Devices.
The following values are defined:
1 = Other
2 = Unknown
3 = EISA
4 = ISA
5 = PCI
6 = ATA/ATAPI
7 = Flexible Diskette
8 = 1496
9 = SCSI Parallel Interface
10 = SCSI Fibre Channel Protocol
11 = SCSI Serial Bus Protocol
12 = SCSI Serial Bus Protocol-2 (1394)
13 = SCSI Serial Storage Architecture
14 = VESA
15 = PCMCIA
16 = Universal Serial Bus
17 = Parallel Protocol
18 = ESCON
19 = Diagnostic
20 = I2C
21 = Power
22 = HIPPI
23 = MultiBus
24 = VME
25 = IPI
26 = IEEE-488
27 = RS232
28 = IEEE 802.3 10BASE5
29 = IEEE 802.3 10BASE2
30 = IEEE 802.3 1BASE5
31 = IEEE 802.3 10BROAD36
32 = IEEE 802.3 100BASEVG
33 = IEEE 802.5 Token-Ring
34 = ANSI X3T9.5 FDDI
35 = MCA
36 = ESDI
37 = IDE
38 = CMD
39 = ST506
40 = DSSI
41 = QIC2
42 = Enhanced ATA/IDE
43 = AGP
44 = TWIRP (two-way infrared)
45 = FIR (fast infrared)
46 = SIR (serial infrared)
47 = IrBus
SpeedLimit Defines connection speed limit of the IR port, in bits per second.
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
VirtualCOMPortName Defines the virtual COM port the IR is connected to.
VirtualLPTPortName Defines the virtual LPT port the IR is connected to.
Dell_IRQ
Availability Availability of the IRQ.
The following values are defined:
1 = Other