Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
SeperateSyncHVSupported Separate Sync H and V Signals are supported.
sRGBStandardDefaultColorSpace If the bit is set to 1, the display uses the sRGB standard default color space as its primary color space.
StandbyModeSupported Standby mode support for this monitor
SuspendModeSupported Suspend mode support for this monitor
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
VeryLowPowerSupported Very low power mode support for this monitor
Dell_NetworkAdapter
Note: The Network Adapter class displays the virtual software adapters provided by the operating system. Those properties are not displayed in the Device Manager.
Note: OMCI may populate empty or error values of some properties for Bluetooth devices.
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
CurrentNetworkAddress This is the node address that can be modified by software, sometimes referred to as the Locally Administered Address (LAA).
Description A short description of the device.
DeviceID An address or other identifying information to uniquely name the logical device.
Link Technology Defines the topology of the network. Ethernet, Token Ring etc.
The following values are defined:
1 = Unknown
2 = Other
3 = Ethernet
4 = IB
5 = FC
6 = FDDI
7 = ATM
8 = Token Ring
9 = Frame Relay
10 = Infra Red
11 = Blue Tooth
12 = Wireless
MajorVersion The MajorVersion property indicates the major version of the driver.
MinorVersion The MinorVersion property indicates the minor version of the driver.
Manufacturer Manufacturer of this network adapter.
Note: The value of this property is obtained from Windows API. Since Windows API can not get the value from the bluetooth device driver, the Manufacturer property may display an empty value in
OMCI.
MaxSpeed The maximum speed, in Bits per Second, for the network adapter.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
NetConnectionID The NetConnectionID property indicates the name of the network adapter interface in windows.
Product Product name for this network adapter.
ServiceName The ServiceName property indicates the service name of the network adapter. This name is usually shorter that the full product name.
Speed An estimate of the current bandwidth in Bits per Second. For Adapters which vary in bandwidth or for those where no accurate estimation can be made, this property should contain the nominal
bandwidth.
Status The Status property is a string indicating the current status of the object. Various operational and non-operational statuses are defined.
Operational statuses are "OK", "Degraded", "Stressed" and "Pred Fail". "Stressed" indicates that the Element is functioning, but needs attention.
Non-operational statuses can also be specified. These are "Error", "NonRecover", "Starting", "Stopping", "Stopped", "Service", "No Contact" and "Lost Comm". "NonRecover" indicates that a non-
recoverable error has occurred.
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
TimeOfLastReset The TimeOfLastReset property indicates when the network adapter was last reset.
Note: This property will not be available in this release. Obtain the value from cimv2 namespace.
Dell_PCCard
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
Description A short description of the PC card.
HostingBoard Boolean indicating that this Card is a Motherboard or, more generically, a baseboard in a Chassis.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
PCCardFunction Returns the function of the card in the PC Card slot.
PCCardNameandVersion Returns the name and the version of the card in the PC Card slot.
Tag An arbitrary string that uniquely identifies the physical element and serves as the Element's key. The Tag property can contain information such as asset tag or serial number data. The key for physical
element is placed very high in the object hierarchy in order to independently identify the hardware/entity, regardless of physical placement in or on Cabinets, Adapters, and so on. For example, a hot
swappable or removable component may be taken from its containing (scoping) Package and be temporarily unused. The object still continues to exist - and may even be inserted into a different
scoping container. Therefore, the key for physical element is an arbitrary string and is defined independently of any placement or location-oriented hierarchy.