Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli78/en/refgd/index.htm[10/19/2012 10:04:25 AM]
EndingAddress The ending address, referenced by an application or operating system and mapped by a memory controller, for this Memory object. The ending address is specified in KBs.
ErrorAccess An integer enumeration indicating the memory access operation that caused the last error.
The following values are defined:
1 = Other
2 = Unknown
3 = Read
4 = Write
5 = Partial Write
ErrorAddress Specifies the address of the last memory error. The type of error is described by the ErrorInfo property. If the ErrorInfo property is equal to 3, "OK", then this property has no meaning.
ErrorGranularity Specifies whether the current error's location can be resolved to the partition or device level.
The following values are defined:
1 = Other
2 = Unknown
3 = Device level
4 = Memory Partition level
ErrorInfo An integer enumeration describing the type of error that occurred most recently.
The following values are defined:
1 = Other
2 = Unknown
3 = OK
4 = Bad Read
5 = Parity Error
6 = Single-Bit Error
7 = Double-Bit Error
8 = Multi-Bit Error
9 = Nibble Error
10 = Checksum Error
11 = CRC Error
12 = Undefined
13 = Undefined
14 = Undefined
ErrorMethodology ErrorMethodology for Memory is a string property that indicates whether parity or CRC algorithms, ECC or other mechanisms are used. Details on the algorithm can also be supplied.
ErrorResolution Specifies the range, in bytes, to which the last error can be resolved. For example, if error addresses are resolved to bit 11 (that is, on a typical page basis), then errors can be resolved to 4K
boundaries and this property is set to 4000. If the ErrorInfo property is equal to 3, "OK", then this property has no meaning.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
PartitionWidth The number of Memory Devices that form a single row of memory for the partition. 0x80000000 denotes 'unknown'.
StartingAddress The beginning address, referenced by an application or operating system and mapped by a memory controller, for this Memory object. The starting address is specified in KBs.
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
VendorSyndrome Vendor-specific syndrome or CRC data associated with the erroneous access.
Dell_Monitor
Caption The caption of the device.
ColorCodeFormatSupported Color code format supported.
ColorDepthBits Color Bit Depth.
CompositSyncSignalOnGreenVideoSuppoted Composite Sync Signal on Green Video is supported.
CompositSyncSignalOnHorizontalSuppoted Composite Sync Signal on Horizontal is supported.
ContinuousFrequency For EDID 1.3, this bit indicated support for or no support for GTF (using the default GTF parameter values). For EDID 1.4, the following values are defined:
1= Continuous frequency
0= Non-Continuous Frequency
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
Description A short description of the device.
DeviceID An address or other identifying information to uniquely name the logical device.
EDIDGamma Display transfer characteristics (GAMMA). Range is from 1.00 to 3.54.
GAMMA = (EDID Value + 100) / 100.
EDIDVersionNumber EDID version and reversion number.
InputAnalog Input is a analog video signal interface.
InputDigital Input is a digital video signal interface.
InputDisplayPort DisplayPort is supported.
InputDVI DVI is supported.
InputHDMI HDMI is supported.
ManufactureDate Manufacturer date of this monitor.
Manufacturer Manufacturer of this monitor.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
PhysicalSizeH Horizontal screen size in cm.
PhysicalSizeV Vertical screen size in cm.
Product Product name for this monitor.
ProductCode Product code of this monitor.