Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli77/en/refgd/index.htm[10/19/2012 10:07:05 AM]
ServiceTag The Service Tag of this system.
Status This property indicates the current status of the logical device.
The following values are defined:
OK
Error
Degraded
Unknown
Pred Fail
Starting
Stopping
Service
Stressed
NonRecover
No Contact
Lost Comm
Stopped
SystemClass This is the system type which is installed and running the instrumentation.
The following values are defined:
1 = Other
2 = Unknown
3 = Workstation
4 = Server
5 = Desktop
6 = Portable
7 = Net PC
SystemDescription Product name for this system.
SystemName The name of this system.
SystemVendor Manufacturer of this system.
COMPONENTS
This section provides information about hardware components of the system such as battery, chassis, disk drive, fan, keyboard, memory, and so on. Table 1-3 lists Dell OMCI Components classes and properties.
Table 1-3: Dell OpenManage Client Instrumentation Components Classes and Properties
Dell_Battery
BatteryStatus Description of the Battery's charge status. Values such as "Fully Charged" (value=3) or "Partially Charged" (11) can be specified. The value, 10, is not valid in the CIM Schema since in DMI it
represents that no battery is installed. In this case, this object should not be instantiated.
The following values are defined:
1 = Other
2 = Unknown
3 = Fully Charged
4 = Low
5 = Critical
6 = Charging
7 = Charging and High
8 = Charging and Low
9 = Charging and Critical
10 = Undefined
11 = Partially Charged
Caption The caption of the device.
Chemistry An enumeration that describes the Battery's chemistry.
The following values are defined:
1 = Other
2 = Unknown
3 = Lead Acid
4 = Nickel Cadmium
5 = Nickel Metal Hydride
6 = Lithium-ion
7 = Zinc air
8 = Lithium Polymer
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
Description A short description of the device.
DesignCapacity The design capacity of the battery in mWatt-hours. If this property is not supported, enter 0.
DesignVoltage The design voltage of the battery in mVolts. If this attribute is not supported, enter 0.
DeviceID An address or other identifying information to uniquely name the logical device.
EstimatedChargeRemaining An estimate of the percentage of full charge remaining.
EstimatedRunTime EstimatedRunTime is an estimate in minutes of the time to battery charge depletion under the present load conditions if the utility power is off, or lost and remains off, or a Laptop is disconnected
from a power source.
FullChargeCapacity The full charge capacity of the battery in mWatt-hours. Comparison of this value to the Battery DesignCapacity determines when the Battery requires replacement. A Battery's end of life is typically
when the FullChargeCapacity falls below 80% of the DesignCapacity. If this property is not supported, enter 0.
Location The location of the battery
ManufactureDate The battery manufacture date.