Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli77/en/refgd/index.htm[10/19/2012 10:07:05 AM]
2 = Off
SerialATAChannel3 Enables or Disables Serial ATA channel 3.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel4 Enables or Disables Serial ATA channel 4.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel5 Enables or Disables Serial ATA channel 5.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel6 Enables or Disables Serial ATA channel 6.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel7 Enables or Disables Serial ATA channel 7.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel8 Enables or Disables Serial ATA channel 8.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialCommunication Sets the Serial Communication.
The following values are defined:
1 = Other
2 = Unsupported
3 = Off
4 = On without Console Redirection
5 = On with Console Redirection via COM1
6 = On with Console Redirection via COM2
SerialPort1Configuration This property defines the serial port 1 configuration.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disable
4 = Auto
5 = COM1
6 = COM2
7 = COM3
8 = COM4
SerialPort2Configuration This property defines the serial port 2 configuration.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disable
4 = Auto
5 = COM2
6 = COM4
SERRDMIMessage Enables or Disables SERR DMI Messages.
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
SetCMOSToDefault Request or don't request a default of CMOS values on the next boot.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SettingID The identifier by which the Setting object is known.
SingleByteECCLogging BIOS has disabled reporting/logging or Single Byte ECC errors in the chipset. This property is read-only.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled