Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli77/en/refgd/index.htm[10/19/2012 10:07:05 AM]
4 = Minimum
5 = Regular
6 = Maximum
PrimaryParallelATAMaster Enables or Disables primary Parallel ATA master channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
PrimaryParallelATASlave Enables or Disables primary Parallel ATA slave channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
PrimaryVideo Sets the Primary Video source.
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
PromptOnError Enable/Disable the Prompt on Error.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
RadioTransmission Enables or Disables the radio transmission (MiniPCI Wireless or Bluetooth module).
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
SATA Controllers Enable/Disable all SATA Controllers.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disable all
4 = Enable all
SATADIPM This property will allow users to disable or enable the feature that allows SATA HDDs to initiate link power management transitions.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SD Card Enable/Disable the SD Card.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SecondaryParallelATAMaster Enables or Disables secondary Parallel ATA master channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SecondaryParallelATASlave Enables or Disables secondary Parallel ATA slave channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
Selective USB Enable Selective USB feature to disable all USB ports, except for the 2 Selective USB ports. This option will allow only keyboard/mouse connected to the Selective USB ports for the boot
process to continue. Disable Selective USB feature to resume normal USB status and normal boot procedure.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SerialATAChannel1 Enables or Disables Serial ATA channel 1.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel2 Enables or Disables Serial ATA channel 2.
The following values are defined:
0 = Unsupported
1 = Auto