Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli77/en/refgd/index.htm[10/19/2012 10:07:05 AM]
3 = Enabled
4 = Disabled
NodeInterleave Enables or Disables Node Interleave.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NoExecute Enables or Disables the No Execute (NX) flag.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NumberOfCoresPerProcessor Rolls the number of enabled cores in each processor. By default, the maximum number of cores per processor will be enabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = 1 Core
4 = 2 Cores
5 = 4 Cores
6 = 6 Cores
7 = 8 Cores
8 = 10 Cores
9 = 12 Cores
10 = All
NumLock Enables or Disables Num Lock.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
Onboard1394 Enables or Disables on-board 1394 controller on next boot.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OnboardModem Enables or Disables the Onboard Modem.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OnReader Enable/Disable Latitude/Precision/Optiplex On Reader feature.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OpticalDriveController Enable/Disable the Optical Drive Controller.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OSInstallMode Enables or Disables OS Install Mode (Limit System Memory feature).
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
ParallelPortConfiguration This property defines the parallel port configuration.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = LPT1
5 = LPT2
6 = LPT3
ParallelPortMode This property defines the parallel port mode.
The following values are defined:
1 = Other
2 = Unsupported
3 = AT
4 = PS/2
5 = ECP, No DMA
6 = EPP