Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli77/en/refgd/index.htm[10/19/2012 10:07:05 AM]
4 = Every day
5 = Weekdays
AutoOnHour This defines the hour when to turn on the system (0-23).
The following values are defined:
1 = Other
2 = Unsupported
AutoOnMinute This defines the minutes when to turn on the system (0-59).
The following values are defined:
1 = Other
2 = Unsupported
Bitsmart Enable/Disable the Bitsmart.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enable
4 = Disable
BluetoothDevice Enables or disables Bluetooth Device.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
BootMode Enables booting to Unified Extensible Firmware Interface (UEFI) capable operating systems. This ensures compatibility with operating systems that do not support UEFI.
The following values are defined:
1 = Other
2 = Unsupported
3 =
UEFI
4 = BIOS
BootSequence This defines the boot sequence for the next system boot. Boot Sequence information can be found under the class Dell_BootDeviceSequence
with OMCI 6.1.
The following values are defined:
1 = Other
2 = Unsupported
3 = Diskette First
4 = Hard Disk Only
5 = Device List
6 = CD ROM First
BuiltinFloppy This property defines whether the built-in Floppy controller is enabled, auto or read-only.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = Auto
5 = Read-Only
6 = USB
7 = Internal
BuiltinNIC This property defines whether the built-in NIC is enabled or disabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled with PXE Boot
4 = Disabled
5 = Enabled
6 = Enabled with RPL Boot
7 = Enabled with iSCSI Boot
8 = Enabled with ImageServer Boot
BuiltinNIC2 This property defines whether the built-in NIC2 is enabled or disabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled with PXE Boot
4 = Disabled
5 = Enabled
7 = Enabled with iSCSI Boot
BuiltinPointingDevice This property defines whether the built-in pointing device port is enabled or disabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
BusRatio Bus Ratio.
The following values are defined:
1 = Other
2 = Unsupported
3 = Max
4 = 6.0x
5 = 7.0x
6 = 7.5x