Reference Guide
Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli77/en/refgd/index.htm[10/19/2012 10:07:05 AM]
5 = Field Emission Display
6 = Electro Luminescent Display
7 = Gas Plasma
8 = LED
HorizontalResolution Flat panel's horizontal resolution in Pixels.
LightSource A description of the display illumination type.
The following values are defined:
0 = Unknown
1 = Other
2 = Backlit
3 = Edgelit
4 = Reflective
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
ScanMode A flat panel's scan mode indicating either single or dual scan.
The following values are defined:
0 = Unknown
1 = Other
2 = Single Scan
3 = Dual Scan
SupportsColor Boolean indicating whether the flat panel supports color display.
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
TotalPowerOnHours The total number if hours that this device has been powered.
VerticalResolution Flat panel's vertical resolution in Pixels.
Dell_Keyboard
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
Description A short description of the device.
DeviceID An address or other identifying information to uniquely name the logical device.
Layout A free-form string indicating the format and layout of the Keyboard.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
Dell_Memory
Caption The caption of the device.
CorrectableError Boolean indicating that the most recent error was correctable. If the ErrorInfo property is equal to 3, "OK", then this property has no meaning.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
Description A short description of the memory.
DeviceErrorAddress Physical address of the error relative to the start of the device, in bytes.0x80000000 denotes 'unknown'.
DeviceID An address or other identifying information to uniquely name the logical device.
EndingAddress The ending address, referenced by an application or operating system and mapped by a memory controller, for this Memory object. The ending address is specified in KBs.
ErrorAccess An integer enumeration indicating the memory access operation that caused the last error.
The following values are defined:
1 = Other
2 = Unknown
3 = Read
4 = Write
5 = Partial Write
ErrorAddress Specifies the address of the last memory error. The type of error is described by the ErrorInfo property. If the ErrorInfo property is equal to 3, "OK", then this property has no meaning.
ErrorGranularity Specifies whether the current error's location can be resolved to the partition or device level.
The following values are defined:
1 = Other
2 = Unknown
3 = Device level
4 = Memory Partition level
ErrorInfo An integer enumeration describing the type of error that occurred most recently.
The following values are defined:
1 = Other
2 = Unknown
3 = OK
4 = Bad Read
5 = Parity Error
6 = Single-Bit Error