Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
17 = Excessive Vibration
18 = File Format Error
19 = Fire Detected
20 = Flood Detected
21 = Framing Error
22 = HVAC Problem
23 = Humidity Unacceptable
24 = I/O Device Error
25 = Input Device Error
26 = LAN Error
27 = Non-Toxic Leak Detected
28 = Local Node Transmission Error
29 = Loss of Frame
|30 = Loss of Signal
31 = Material Supply Exhausted
32 = Multiplexer Problem
33 = Out of Memory
34 = Output Device Error
35 = Performance Degraded
36 = Power Problem
37 = Pressure Unacceptable
38 = Processor Problem (Internal Machine Error)
39 = Pump Failure
40 = Queue Size Exceeded
41 = Receive Failure
42 = Receiver Failure
43 = Remote Node Transmission Error
44 = Resource at or Nearing Capacity
45 = Response Time Excessive
46 = Retransmission Rate Excessive
47 = Software Error
48 = Software Program Abnormally Terminated
49 = Software Program Error (Incorrect Results)
50 = Storage Capacity Problem
51 = Temperature Unacceptable
52 = Threshold Crossed
53 = Timing Problem
54 = Toxic Leak Detected
55 = Transmit Failure
56 = Transmitter Failure
57 = Underlying Resource Unavailable
58 = Version MisMatch
59 = Previous Alert Cleared
60 = Login Attempts Failed
61 = Software Virus Detected
62 = Hardware Security Breached
63 = Denial of Service Detected
64 = Security Credential MisMatch
65 = Invalid Access of Data Detected
ProbableCauseDescription Provides additional information related to the probable cause.
RecommendedActions Free form descriptions of the recommended actions to take to resolve the cause of the notification.
Trending Provides information on trending - trending up, down or no change.
The following values are defined:
0 = Unknown
1 = Not Applicable
2 = Trending Up
3 = Trending Down
4 = No Change
Dell_IndicationConfiguration
Caption The caption of the device.
Description A short description of the device.
LocalOnly This property shows if the events from this the event source should be reported to the local indication consumer only or should be reported to CIMOM as an indication. TRUE for reporting to local consumer
only, and FALSE for reporting as an indication.
Name The label by which the Configuration object is known.
PollEnabled This property shows if status-polling of the event source is enabled or not. TRUE for enable, and FALSE for disabled.
PollingInterval The polling interval for event source, in seconds.
StartDelay The start delay before polling the event source, in seconds.
Dell_IndicationConsumer
Name This property defines the name of the indication consumer.
Dell_IndicationStaticValues
AlertingManagedElement The same as in the Dell_Indication class.