Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
SafeUSB Enable Safe USB feature to disable all USB ports except for the 2 Safe USB ports. This option allows only the keyboard/mouse connected to the Safe USB ports for the boot process to continue. Disable Safe
USB feature to resume normal USB status and normal boot procedure.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SATADIPM This property will allow users to disable or enable the feature that allows SATA HDDs to initiate link power management transitions.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
SecondaryParallelATAMaster Enables or Disables secondary Parallel ATA master channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SecondaryParallelATASlave Enables or Disables secondary Parallel ATA slave channel.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel1 Enables or Disables Serial ATA channel 1.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel2 Enables or Disables Serial ATA channel 2.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel3 Enables or Disables Serial ATA channel 3.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel4 Enables or Disables Serial ATA channel 4.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel5 Enables or Disables Serial ATA channel 5.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel6 Enables or Disables Serial ATA channel 6.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel7 Enables or Disables Serial ATA channel 7.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialATAChannel8 Enables or Disables Serial ATA channel 8.
The following values are defined:
0 = Unsupported
1 = Auto
2 = Off
SerialCommunication Sets the Serial Communication.
The following values are defined:
1 = Other
2 = Unsupported
3 = Off
4 = On without Console Redirection
5 = On with Console Redirection via COM1
6 = On with Console Redirection via COM2
SerialPort1Configuration This property defines the serial port 1 configuration.
The following values are defined:
1 = Other
2 = Unsupported