Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
ESATAPorts
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
ExpressCharge This property define the express charging.
ExternalHotkey
Sets the External Hotkey to Scroll Lock or Disabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = Scroll Lock
4 = Disabled
Fastboot Enables or Disables fast booting.
The following values are defined:
1 = Other
2 = Unsupported
3 = Thorough
4 = Minimal
5 = Automatic
HardDiskAcousticMode Sets the Hard Disk Acoustic Mode.
The following values are defined:
1 = Other
2 = Unsupported
3 = Bypass
4 = Quiet
5 = Suggested
6 = Performance
HardDiskFailover Specifies which devices in the Hard-Disk Drive Sequence menu are attempted in the boot sequence. When set to OFF, only the first device in the list is attempted. When set to ON, all devices are attempted in
order, as listed in the Hard-Disk Drive Sequence.
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
HotDocking Enables or Disables warm and hot docking/undocking.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = Enabled
Hyperthreading Enables or Disables hyperthreading on next boot. On some Dell platforms, this property will show Enabled or Disabled despite the platform not supporting hyperthreading. The platforms in question are those
that support Multi-Core processor technology, but do not support hyperthreading. In this case, the property actually toggles the multi-core capability on and off, rather than hyperthreading.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
IDEController This property defines whether the IDE controller is enabled or disabled.
The following values are defined:
1 = Other
2 = Unsupported
3 = Auto
4 = Disabled
IntegratedAudio Status of the system's built-in sound device.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = Enabled
5 = Auto
IntegratedRAIDController Enables or Disables the Integrated RAID Controller.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
IntegratedSASController Enables or Disables the Integrated SAS Controller.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
IntegratedSATAController Sets the Integrated SATA Controller.
The following values are defined:
1 = Other
2 = Unsupported
3 = Off