Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
DellInstanceID This property defines the instance ID of this class.
Description A short description of the device.
PowerManagementCapabilities Defines what type of Power Management this system supports.
The following values are defined:
1 = Other
2 = Unknown
3 = APM 1.1
4 = APM 1.2
5 = ACPI 1.0
PowerManagementEnable Enables/Disables Power Management.
The following values are defined:
0 = Disabled
1 = Enabled
2 = Unsupported
ReducedCPUClockSpeed Defines whether to enable CPU to slow down when possible
The following values are defined:
1 = Other
2 = Unknown
3 = Enabled
4 = Disabled
RingEventResume Enables system to resume operation when a modem ring occurs on a serial port or a wakeup occurs on a PC Card
The following values are defined:
1 = Other
2 = Unknown
3 = Enabled
4 = Disabled
SettingID The identifier by which the Setting object is known.
Dell_PowerManagementSettingsOnBattery
Brightness The brightness that will be used for the system power management. There is a setting for Battery and a setting for AC, to allow the user some control over the amount of power being used for display. There
are 8 settings from dimmest to brightest.
The following values are defined:
0 = Minimum
1 = 1
2 = 2
4 = 4
5 = 5
6 = 6
7 = Maximum
8 = Unsupported
Caption The caption of the device.
DellInstanceID This property defines the instance ID of this class.
Description A short description of the device.
PowerManagementEnable Enables/Disables Power Management.
The following values are defined:
0 = Disabled
1 = Enabled
2 = Unsupported
ReducedCPUClockSpeed Defines whether to enable CPU to slow down when possible
The following values are defined:
1 = Other
2 = Unknown
3 = Enabled
4 = Disabled
SettingID The identifier by which the Setting object is known.
Dell_RemoteFlashBIOSSettings
Caption The caption of the device.
CompletionCode This property defines the completion code of the last BIOS update.
The following values are defined:
1 = Other
2 = Unknown
3 = Completed successfully
4 = Bad Image
5 = Could not access flash
6 = Flash memory not ready
7 = Currently disabled
8 = Battery must be installed
9 = Fully charged battery must be installed
10 = External power adapter must be connected
11 = 12 Volts could not be set
12 = 12 Volts could not be removed