Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
VGADACSnoop This attribute allows the enabling/disabling of VGA DAC Snoop in BIOS. Unsupported means that this system BIOS does not support VGA DAC Snoop.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
Dell_HardDiskDriveSequence
DellInstanceID Index used to identify the instance of this hard-disk.
DiskOrder The order of this device in the hard-disk priority list.
The following values are defined:
1 = This hard-disk is the first in the list,
2 = This hard-disk is the second, and so on.
HardDiskName The name of this hard-disk drive as specified by the BIOS.
Dell_HardDiskDrivePasswordConfiguration
HDDLocation Defines the location of the hard drive
HDDPasswordStatus Defines the password status of the hard drive at the location identified by HDDLocation
The following values are defined:
0 = No Hard Drive present
1 = Hard Drive present
2 = Hard Drive has a password
Name The label by which the Configuration object is known.
Dell_InternalSpeakerSettings
Caption The caption of the device.
DellInstanceID This property defines the instance ID of this class.
Description A short description of the device.
KeyboardClick Enables/disables keyboard click sound.
The following values are defined:
2 = Unsupported
3 = Disabled
4 = Enabled
SettingID The identifier by which the Setting object is known.
SpeakerVolume The volume of the speaker.
The following values are defined:
1 = Other
2 = Unsupported
3 = Off
4 = Low
5 = Medium
6 = High
7 = Enable
Dell_PowerManagementSettings
AlarmResume Enables system to resume operation from suspend/standby mode at a time determined by an application program.
The following values are defined:
1 = Other
2 = Unknown
3 = Enabled
4 = Disabled
Brightness The brightness that will be used for the system power management. There is a setting for Battery and a setting for AC, to allow the user some control over the amount of power being used for display. There
are 8 settings from dimmest to brightest.
The following values are defined:
0 = Minimum
1 = 1
2 = 2
3 = 3
4 = 4
5 = 5
6 = 6
7 = Maximum
8 = Unsupported
Caption The caption of the device.