Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
BaseIOAddress Base I/O address for this serial port.
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
Description A short description of the device.
DeviceID An address or other identifying information to uniquely name the logical device.
IRQUsed IRQ number that is being used by this serial port.
LogicalName The logical name of this serial port under this operating environment.
MaxBaudRate Maximum baud rate in Bits per Second supported by the SerialController.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
Security An enumeration indicating the operational security for the Controller. For example, information that the Device's external interface is locked out or Boot Bypass can be described using this property.
The following values are defined:
1 = Other
2 = Unknown
3 = None
4 = External Interface Locked Out
5 = External Interface Enabled
6 = Boot Bypass
SerialPortCapabilities The capabilities of this Serial port.
The following values are defined:
1 = Other
2 = Unknown
3 = XT/AT compatible
4 = 16450 compatible
5 = 16550 compatible
6 = 16550A compatible
160 = 8251 compatible
161 = 8251FIFO compatible
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
Type The connector used to interface with the I/O device on this serial port.
The following values are defined:
1 = Other
2 = Unknown
3 = DB-9 pin male
4 = DB-9 pin female
5 = DB-25 pin male
6 = DB-25 pin female
7 = RJ-11
8 = RJ-45
9 = Proprietary
10 = Circular DIN-8 male
11 = Circular DIN-8 female
12 = Infrared
160 = Mini-Centronics Type-14
161 = Mini-Centronics Type-26
Dell_USBController
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
Description A short description of the device.
DeviceID An address or other identifying information to uniquely name the logical device.
InstallDate A date time value indicating when the object was installed. A lack of a value does not indicate that the object is not installed.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
ProtocolSupported The protocol used by the Controller to access 'controlled' Devices.
The following values are defined:
1 = Other
2 = Unknown
3 = EISA
4 = ISA
5 = PCI
6 = ATA/ATAPI
7 = Flexible Diskette
8 = 1496
9 = SCSI Parallel Interface
10 = SCSI Fibre Channel Protocol
11 = SCSI Serial Bus Protocol
12 = SCSI Serial Bus Protocol-2 (1394)
13 = SCSI Serial Storage Architecture
14 = VESA
15 = PCMCIA
16 = Universal Serial Bus
17 = Parallel Protocol
18 = ESCON
19 = Diagnostic
20 = I2C