Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
DeviceID An address or other identifying information to uniquely name the logical device.
DeviceMap The DeviceMap property indicates the order in which devices are listed with this SCSI controller.
DriverName The DriverName property indicates the driver file name of the SCSI controller.
HardwareVersion The HardwareVersion property indicates the hardware version number of the SCSI controller.
Manufacturer The Manufacturer property indicates the name of the SCSI controller manufacturer.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
ProtocolSupported The protocol used by the Controller to access 'controlled' Devices.
The following values are defined:
1 = Other
2 = Unknown
3 = EISA
4 = ISA
5 = PCI
6 = ATA/ATAPI
7 = Flexible Diskette
8 = 1496
9 = SCSI Parallel Interface
10 = SCSI Fibre Channel Protocol
11 = SCSI Serial Bus Protocol
12 = SCSI Serial Bus Protocol-2 (1394)
13 = SCSI Serial Storage Architecture
14 = VESA
15 = PCMCIA
16 = Universal Serial Bus
17 = Parallel Protocol
18 = ESCON
19 = Diagnostic
20 = I2C
21 = Power
22 = HIPPI
23 = MultiBus
24 = VME
25 = IPI
26 = IEEE-488
27 = RS232
28 = IEEE 802.3 10BASE5
29 = IEEE 802.3 10BASE2
30 = IEEE 802.3 1BASE5
31 = IEEE 802.3 10BROAD36
32 = IEEE 802.3 100BASEVG
33 = IEEE 802.5 Token-Ring
34 = ANSI X3T9.5 FDDI
35 = MCA
36 = ESDI
37 = IDE
38 = CMD
39 = ST506
40 = DSSI
41 = QIC2
42 = Enhanced ATA/IDE
43 = AGP
44 = TWIRP (two-way infrared)
45 = FIR (fast infrared)
46 = SIR (serial infrared)
47 = IrBus
Status This property indicates the current status of the logical device.
The following values are defined:
OK
Error
Degraded
Unknown
Pred Fail
Starting
Stopping
Service
Stressed
NonRecover
No Contact
Lost Comm
Stopped
StatusInfo The StatusInfo property indicates the status of the logical device.
The following values are defined:
1 = Some Other
2 = Unknown
3 = Enabled
4 = Disabled
5 = Not Applicable
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
Dell_SerialController