Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
3 = XT/AT
4 = PS/2
5 = IEEE 1284
6 = Proprietary
160 = PC-98
161 = PC-98-Hireso
162 = PC-H98
163 = PC-98Note
164 = PC-98Full
Security An enumeration indicating the operational security for the Controller.
The following values are defined:
1 = Other
2 = Unknown
3 = None
4 = External Interface Locked Out
5 = External Interface Enabled
6 = Boot Bypass
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
Type The connector used to interface with the I/O device on this parallel port.
The following values are defined:
1 = Other
2 = Unknown
3 = DB-25 Female
4 = DB-25 Male
5 = Centronics
6 = Mini-Centronics
7 = Proprietary
160 = Centronics-14
161 = DB-36 Female
162 = Mini-Centronics-20
Dell_PCIBridge
BaseAddress Array of double word base memory addresses.
BridgeType The type of bridge. Except for "Host" (value=0), the type of bridge is PCI to <value>. For type "Host", the device is a Host to PCI bridge.
The following values are defined:
0 = Host
1 = ISA
2 = EISA
3 = Micro Channel
4 = PCI
5 = PCMCIA
6 = NuBus
7 = CardBus
8 = RACEway
128 = Other
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
Description A short description of the device.
DeviceID An address or other identifying information to uniquely name the logical device.
IOBase Base address of I/O addresses supported by the bus. The upper four bits of this property specify the address bits, AD[15::12], of the I/O address. The remaining 12 bits of the I/O address are assumed to be 0.
IOBaseUpper16 Upper 16 bits of the supported I/O base address when 32-bit I/O addressing is used. The lower 16 bits are assumed to be 0.
IOLimit End address of the I/O addresses supported by the bus. The upper four bits of this property specify the address bits, AD[15::12], of the I/O address. The remaining 12 bits of the I/O address are assumed to be
all 1's.
IOLimitUpper16 Upper 16 bits of the supported I/O end address when 32-bit I/O addressing is used. The lower 16 bits are assumed to be all 1's.
MemoryBase Base address of the memory supported by the bus. The upper twelve bits of this property specify the address bits, AD[31::20], of a 32-bit memory address. The remaining 20 bits of the address are assumed
to be 0.
MemoryLimit End address of the memory supported by the bus. The upper twelve bits of this property specify the address bits, AD[31::20], of a 32-bit memory address. The remaining 20 bits of the address are assumed to
be all 1's.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
PCIDeviceID The PCI device ID.
PCIVendorID The PCI vendor ID.
PrefetchBaseUpper32 Upper 32 bits of the supported prefetch base address when 64-bit addressing is used. The lower 32 bits are assumed to be 0.
PrefetchLimitUpper32 Upper 32 bits of the supported prefetch end address when 64-bit addressing is used. The lower 32 bits are assumed to be all 1's.
PrefetchMemoryBase Base address of the memory that can be prefetched by the bus. The upper twelve bits of this property specify the address bits, AD[31::20], of a 32-bit memory address. The remaining 20 bits of the address
are assumed to be 0.
PrefetchMemoryLimit End address of the memory that can be prefetched by the bus. The upper twelve bits of this property specify the address bits, AD[31::20], of a 32-bit memory address. The remaining 20 bits of the address are
assumed to be all 1's.
PrimaryBusNumber The number of the PCI bus segment to which the primary interface of the bridge is connected.
SecondaryBusDeviceSelectTiming The slowest device select timing for a target device on the secondary bus.
The following values are defined:
0 = Unknown
1 = Other