Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
Shareable Boolean indicating whether the IRQ can be shared.
TriggerLevel IRQ trigger level indicating whether the interrupt is triggered by the hardware signal going high or low.
The following values are defined:
1 = Other
2 = Unknown
3 = Active Low
4 = Active High
TriggerType IRQ trigger type indicating whether edge or level triggered interrupts occur.
The following values are defined:
1 = Other
2 = Unknown
3 = Level
4 = Edge
Vector The Vector property indicates the vector of the IRQ resource. A vector contains the memory address to the function that will execute once the interrupt request is acknowledged by the CPU.
Dell_MemoryResource
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
CSCreationClassName The scoping computer system's Creation class name.
CSName The scoping computer system's Name.
Description A short description of the device.
EndingAddress Ending address of memory mapped I/O.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
ReadWrite Indicates the read-write accessibility of this memory resource.
StartingAddress A part of the object's key value, the starting address of memory mapped I/O.
Status This property indicates the current status of the logical device.
The following values are defined:
OK
Error
Degraded
Unknown
Pred Fail
Starting
Stopping
Service
Stressed
NonRecover
No Contact
Lost Comm
Stopped
Dell_ParallelController
BaseIOAddress Base I/O address for this parallel port.
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
Description A short description of the parallel controller.
DeviceID An address or other identifying information to uniquely name the logical device.
DMASupport Set to true if the Parallel Controller supports DMA.
IRQUsed IRQ number that is being used by this parallel port.
LogicalName The logical name of the I/O device on this parallel port, under this operating environment.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
ParallelPortCapabilities Capabilities of this parallel port. This is a bit field mask.
The following bit values are defined:
NOTE: Multiple bits are set if more than one attribute applies.
0 = XT/AT compatible
1 = PS/2 compatible
2 = ECP
3 = EPP
4 = PC-98
5 = PC-98-Hireso
6 = PC-H98
Pinout The pin out used by the I/O device on this parallel port.
The following values are defined:
1 = Other
2 = Unknown