Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
The following values are defined:
OK
Error
Degraded
Unknown
Pred Fail
Starting
Stopping
Service
Stressed
NonRecover
No Contact
Lost Comm
Stopped
SystemCreationClassName The scoping System's Creation class name.
SystemName The scoping System's Name.
Dell_Slot
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
CurrentUsage The slot that is currently in use.
The following values are defined:
0 = Reserved
1 = Other
2 = Unknown
3 = Available
4 = In Use
Description A short description of the device.
MaxDataWidth Maximum bus width of adapter Cards that can be inserted into this Slot, in bits. If the value is 'unknown', enter 0. If the value is other than 8, 16, 32, 64 or 128, enter 1.
Model The name by which the physical element is generally known.
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
Number The Number property indicates the physical slot number, which can be used as an index into a system slot table, whether or not that slot is physically occupied.
PMESignal The PMESignal property indicates whether the PCI bus Power Management Enabled signal is supported by this slot. PMESignal will be FALSE for non-PCI slots. If TRUE, then the Power Management Enabled
signal is supported.
PoweredOn Boolean indicating that the physical element is powered on (TRUE), or is currently off (FALSE).
Shared The Shared property indicates whether the two or more slots shared a location on the base board such as a PCI/EISA shared slot. If TRUE, the slot is shared.
SlotDesignation The SlotDesignation property contains an SMBIOS string that identifies the system slot designation of the slot on the motherboard.
Status This property indicates the current status of the logical device.
The following values are defined:
OK
Error
Degraded
Unknown
Pred Fail
Starting
Stopping
Service
Stressed
NonRecover
No Contact
Lost Comm
Stopped
SupportsHotPlug Boolean indicating whether the Slot supports hot-plug of adapter Cards.
Tag An arbitrary string that uniquely identifies the physical element and serves as the Element's key. The Tag property can contain information such as asset tag or serial number data. The key for physical
element is placed very high in the object hierarchy in order to independently identify the hardware/entity, regardless of physical placement in or on Cabinets, Adapters, and so on. For example, a hot
swappable or removable component may be taken from its containing (scoping) Package and be temporarily unused. The object still continues to exist - and may even be inserted into a different scoping
container. Therefore, the key for physical element is an arbitrary string and is defined independently of any placement or location-oriented hierarchy.
ThermalRating Maximum thermal dissipation of the Slot in milliwatts.
VccMixedVoltageSupport An array of enumerated integers indicating the Vcc voltage supported by this Slot.
The following values are defined:
0 = Unknown
1 = Other
2 = 3.3V
3 = 5V
VppMixedVoltageSupport An array of enumerated integers indicating the Vpp voltage supported by this Slot.
The following values are defined:
0 = Unknown
1 = Other
2 = 3.3V
3 = 5V
4 = 12V