Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
16 = QFP
17 = TQFP
18 = SOIC
19 = LCC
20 = PLCC
21 = BGA
22 = FPBGA
23 = LGA
Manufacturer The name of the organization responsible for producing the physical element. This may be the entity from whom the Element is purchased, but this is not necessarily true. The latter information is contained in
the Vendor property of CIM_Product.
Note: This property displays the JEDEC ID code for the manufacturer of the memory. For information on JEDEC ID codes, see www.jedec.org
.
MemoryArrayHandle The handle, or instance number, associated with the memory array to which this device belongs.
MemoryType The type of physical memory.
The following values are defined:
0 = Unknown
1 = Other
2 = DRAM
3 = Synchronous DRAM
4 = Cache DRAM
5 = EDO
6 = EDRAM
7 = VRAM
8 = SRAM
9 = RAM
10 = ROM
11 = Flash
12 = EEPROM
13 = FEPROM
14 = EPROM
15 = CDRAM
16 = 3DRAM
17 = SDRAM
18 = SGRAM
19 = RDRAM
20 = DDR
21 = DDR-2
22 = BRAM
23 = FB-DIMM
24 = DDR3
25 = FBD2
Name The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
PartNumber The part number assigned by the organization responsible for producing or manufacturing the physical element.
SerialNumber A manufacturer-allocated number used to identify the physical element.
Speed The speed of the physical memory, in nanoseconds.
Tag An arbitrary string that uniquely identifies the physical element and serves as the element's key. The Tag property can contain information such as asset tag or serial number data. The key for physical
element is placed very high in the object hierarchy in order to independently identify the hardware/entity, regardless of physical placement in or on Cabinets, Adapters, etc. For example, a hot swappable or
removable component may be taken from its containing (scoping) Package and be temporarily unused. The object still continues to exist - and may even be inserted into a different scoping container.
Therefore, the key for physical element is an arbitrary string and is defined independently of any placement or location-oriented hierarchy.
TotalWidth Total width, in bits, of the physical memory, including check or error correction bits. If there are no error correction bits, the value in this property should match that specified for data width.
TypeDetail Additional detail on the device type.
The following bit values are defined:
NOTE: Multiple bits are set if more than one attribute applies.
0 = Reserved, set to 0.
1 = Other
2 = Unknown
3 = Fast-paged
4 = Static column
5 = Pseudo-static
6 = RAMBUS
7 = Synchronous
8 = CMOS
9 = EDO
10 = Window DRAM
11 = Cache DRAM
12 = Non-volatile
Dell_PhysicalMemoryArray
Caption The caption of the device.
CreationClassName Creation class name indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
Description A short description of the device.
Location The physical location of the Memory Array, whether on the system board or an add-on board.
The following values are defined:
0 = Reserved
1 = Other
2 = Unknown
3 = System board or motherboard
4 = ISA add-on card