Reference Guide

--wakeonlanbootovrd

Valid Argument enable, disable

Description

Enables or disables the wake on LAN boot override feature.

• enable — When the system powers on due to a wake-on-LAN event, the NIC

boot-ROM is automatically given the highest boot priority, pre-pending the PXE

boot-ROM to the system current boot sequence. If the system powers on due to

some other event, this selection does not influence the boot sequence.

• disable — Disables the boot override feature and the system boot sequence is in

effect for all types of system power on.

Example

C:\>cctk --wakeonlanbootovrd=enable

wakeonlanbootovrd=enable

--watchdogtimer

Valid Argument enable, disable

Description Enables or disables the system to reboot or reset when the watchdog time expires.

Example

C:\>cctk --watchdogtimer=enable

watchdogtimer=enable

--wificatcherchanges

Valid Argument permit, deny

Description Permits or denies Wi-Fi catcher changes. If the administrator password is not set, this

setting will have no effect.

Example

C:\>cctk --wificatcherchanges=permit

wificatcherchanges=permit

--wifilocator

Valid Argument enable, disable

Description Enables or disables the Wi-Fi locator. When enabled, the locator feature can be

activated during S3 to indicate the presence and intensity of wireless network(s), without

fully waking the system.

Example

C:\>cctk --wifilocator=enable

wifilocator=enable