Reference Guide

--usbwake

Valid Argument enable, disable

Description Enables or disables USB wake setting in the next boot. Any USB input device can

generate a wake event.

Example

C:\>cctk --usbwake=enable

usbwake=enable

--uuid

Valid Argument Read-only

Description Reports the UUID for a system. The UUID is a unique system identifier used in PXE

requests.

Example

C:\>cctk --uuid

uuid=4C4C4544-004B-3910-804C-CEC04F463944

--vaconfiglock

Valid Argument unlock, lock

Description Sets the Intel Virtual Appliance Configuration lock.

Example

C:\>cctk --vaconfiglock=unlock

vaconfiglock=unlock

--valsetuppwd

Valid Argument <

password

Description Validates the setup password while setting a value in the BIOS. This is applicable only if

you set a setup password or both setup password and system password.

Example

C:\>cctk --numlock=enable --valsetuppwd=<password>

numlock=enable

--valsyspwd

Valid Argument <

password

Description Validates the system password while setting a value in the BIOS. This is applicable only if

you set a system password and did not set a setup password.

Example

C:\>cctk --numlock=enable --valsyspwd=<password>

numlock=enable