Reference Guide

--setuppwd

Valid Argument <

password

Description Sets the setup password. An argument is required. The password cannot be reported.

Initially you can set the password. If you want to remove the password, provide one

blank space and the old password.

Example

To set the password:

C:\>cctk --setuppwd=<new-password>

To change the password:

C:\>cctk --setuppwd=<old-password> --valsetuppwd=<new-

password>

To remove the password:

C:\>cctk --setuppwd= --valsetuppwd=<old-password>

--sfuenabled

Valid Argument yes, no

Description Enables the verification of digital signatures in the BIOS update payload prior to the

update. If yes, the system BIOS can be updated to versions that have valid digital

signatures. However, it is not possible to restore the value.

Example

C:\>cctk --sfuenabled=yes

sfuenabled=yes

--sma

Valid Argument enable, disable

Description Enables or disables the processor sequential memory access.

Example

C:\>cctk --sma=disable

sma=disable

--smartcardreader

Valid Argument enable, disable

Description Enables or disables the smart card reader.

Example

C:\>cctk --smartcardreader=enable

smartcardreader=enable