Reference Guide

--serial1

Valid Argument disable, auto, com1, com2, com3, com4, com1_bmc, bmcserial, bmclan, rac

Description Defines the serial port 1 configuration.

Example

C:\>cctk --serial1=disable

serial1=disable

--serial2

Valid Argument disable, auto, com2, com4

Description Defines the serial port 2 configuration.

Example

C:\>cctk --serial2=disable

serial2=disablef

--serialcomm

Valid Argument off, on, com1cr, com2cr

Description

Sets the behavior of the serial port communication.

• off — Disables the COM port 1 and COM port 2.

• on — Enables the COM port 1 and COM port 2. These ports are made available

for use by the operating system or applications. BIOS Console Redirection is

disabled.

• com1cr — Enables the COM port 1 and COM port 2. These ports are made

available for use by the operating system or applications. BIOS Console

Redirection is through COM port 1.

• com2cr — Enables the COM port 1 and COM port 2. These ports are made

available for use by the operating system or applications. BIOS Console

Redirection is through COM port 2.

Example

C:\>cctk --serialcomm=off

serialcomm=off

--serrdmimsg

Valid Argument on, off

Description Turns the serr Dmi messages on or off.

Example

C:\>cctk --serrdmimsg=on

serrdmimsg=on