Reference Guide

Example (the pci.ids
filename is specified in the
command line instance)
C:\>cctk --pci -n <location_of_pci.ids>
PCI Bus: 0, Device: 0, Function: 0
Vendor: 1166 - ServerWorks
Device: 0012 - CMIC-LE
Slot: 00
Class: 06 - Bridge
SubClass: 00 - CPU/PCI
PCI Bus: 0, Device: 0, Function: 1
Vendor: 1166 - ServerWorks
Device: 0012 - CMIC-LE
Slot: 00
Class: 06 - Bridge
SubClass: 00 - CPU/PCI
PCI Bus: 0, Device: 0, Function: 2
Vendor: 1166 - ServerWorks
Device: 0000 - Unknown
--pcibuscount
Valid Argument 64, 128, 256
Description Sets the maximum PCI bus count for the system.
Example
C:\>cctk --pcibuscount=256
pcibuscount=256
--pcisata
Valid Argument enable, disable
Description Enables or disables the PCI Serial ATA controller.
Example
C:\>cctk --pcisata=enable
pcisata=enable
--pcislots
Valid Argument enable, disable
Description Enables or disables the add-in PCI slots of the system.
Example
C:\>cctk --pcislots=enable
pcislots=enable
--peakshiftbatterythreshold
Valid Argument integers ranging from 15 to 100
Description
Sets the value of Peak Shift battery threshold. When the Peak Shift battery threshold
level is reached, the system starts using AC power. Setting the value to 0 percent, allows
the system to use power only from the battery during Peak Shift duration (Peak Shift Start
time and Peak shift End time).
56