Reference Guide

NOTE: With --activebootlist, do not specify any other sub options, such as --
sequence, --enabledevice, and --disabledevice.
Example
C:\>cctk bootorder --activebootlist=uefi
--bootlisttype
Description
Specifies the boot list as UEFI or legacy. If you want to run any bootorder options, such
as sequence, enabledevice, and so on, on the UEFI boot list, you must specify this sub
option with UEFI argument. The supported arguments are legacy and UEFI.
If --bootlisttype is not specified, running the bootorder sub options applies changes on
the legacy boot list.
Example
C:\>cctk bootorder --bootlisttype=uefi
Example With Sub Options
With the --bootlisttype=uefi option, you can specify the following sub options: --
sequence , --enabledevice , and --disabledevice .
C:\>cctk bootorder --bootlisttype=uefi
--sequence=hdd.1,floppy --enabledevice=
cdrom,hdd.2
C:\>cctk bootorder --bootlisttype=uefi
--sequence=hdd.1,floppy --enabledevice=
cdrom,hdd.2 --valuesetuppwd=password
--disabledevice
Description Disables a device in the boot sequence. Use the device number or device short form as
the argument.
Example
C:\>cctk bootorder --disabledevice=embnic,hdd.1
or
C:\>cctk bootorder --disabledevice=1,3
Example With Sub Options
C:\>cctk bootorder --sequence=hdd.1,floppy
--enabledevice=cdrom,hdd.2 --disabledevice=
nic.1,hdd.3
--enabledevice
Description Enables a device in the boot sequence. Use the device number or device short form as
the argument.
Example
C:\>cctk bootorder --enabledevice=embnic,hdd.1
or
C:\>cctk bootorder --enabledevice=1,3
--sequence
Description
Sets the bootorder based on the arguments provided. Use the device number or device
short form as the argument.
Example
C:\>cctk bootorder --sequence=embnic,hdd.1
29