Reference Guide

--blinkpsu2led

Valid Argument enable

Description

Sets the second Power Supply (PSU 2) status LED to blink. Enabling the LED to blink helps

to recognize the power supply probe in use, while using Advanced System Management

feature. For more details, see Advanced System Management.

NOTE: This option is supported only on systems that support ASM.

Example

C:\>cctk --blinkpsu2led=enable

blinkpsu2led=enable

--blocks3

Valid Argument enable, disable

Description

Enables or disables the Block S3 sleep state. When enabled, the system BIOS blocks all

OSPM/ACPI S3 (Suspend to RAM) requests and enforces the preboot authentication on

all non-S3 resumes. When disabled, the system BIOS allows all OSPM/ACPI S3 (Suspend

to RAM) operation. This moves the system authentication to the OS and prevents any

preboot authentication on resume.

Example

C:\>cctk --blocks3=enable

blocks3=enable

--bltinfloppy

Valid Argument disable, auto

Description Enables or disables built-in floppy controller.

Example

C:\>cctk --bltinfloppy=disable

bltinfloppy=disable

--bltinpntdevice

Valid Argument enable, disable

Description Enables or disables built-in pointing device.

Example

C:\>cctk --bltinpntdevice=disable

bltinpntdevice=disable

--bluetoothdevice

Valid Argument

enable, disable

Description Enables or disables bluetooth device.