Reference Guide

• enable — System alarm resumes the system from the suspended mode.

• disable — System alarm prevents the system to resume from the suspend mode.

Example

C:\>cctk --alarmresume=enable

alarmresume=enable

--amblightsen

Valid Argument enable, disable

Description Enables or disables the ambient light sensor.

Example

C:\>cctk --amblightsen=enable

amblightsen=enable

--asfmode

Valid Argument on, off, alertonly, dash

Description Sets the alert standard format. The alertonly argument enables only error messages. The

dash argument enables LOM to have both DASH and ASF 2.0 functionality.

Example

C:\>cctk --asfmode=on

asfmode=on

--asset

Valid Argument <

string

Description Reports or sets the customer-programmable asset tag number for a system. The

maximum length of an asset tag is 10 characters. Asset tag values should not contain any

spaces.

Example

C:\>cctk --asset=ASSETTAG

--atgsystem

Valid Argument on, off

Description Sets or removes the CMOS bit to indicate whether the system uses an All Terrain Gear

(ATG) base or not.

Example

C:\>cctk --atgsystem=off

atgsystem=off