Users Guide

2. rpm -Uvh cctk-linux-2.2-buildnum.x86_64.
CCTK For Windows Pre-Installation Environment (Windows PE)
Windows PE provides a standalone pre-installation environment that is used to prepare a system for Windows
installation. For client systems that do not have an operating system installed, you can create a bootable image that
contains CCTK to run the CCTK commands on Windows PE. To create Windows PE 3.0, and 3.1 image, you can use
Microsoft Windows Automated Installation Kit (Windows AIK) and to create Windows PE 4.0 image, you can use
Windows Assessment and Deployment Kit (Windows ADK).
Using Windows PE 3.0, Windows PE 3.1, Windows PE 4.0 and you can integrate CCTK, HAPI, and related drivers directly
into a bootable ISO image.
Related Links:
• Creating A Bootable Image PE Using Windows PE 4.0
• Creating A Bootable Image PE Using Windows PE 3.0 And 3.1
Creating A Bootable Image PE Using Windows PE 4.0
1. From the Microsoft website, download Windows ADK, and install it on the client system.
NOTE: While installing select only Deployment Tools and Windows Preinstallation Environment (Windows PE).
2. From support.dell.com, download CCTK, and install it.
3. Integrate the CCTK directory structure to an ISO file to create a bootable ISO image.
Related Link:
• Integrating CCTK Directory Structure To An ISO File Using Windows PE 4.0
Integrating CCTK Directory Structure To An ISO File Using Windows PE 4.0
1. Install Windows 7 SP1 or Windows 8 operating system.
2. Download and install Windows ADK for Windows 8.
3. Create Windows PE 4.0 image.
Related Links:
• Creating Windows PE 4.0 64-Bit Image
• Creating Windows PE 4.0 32- Bit Image
Creating Windows PE 4.0 64-Bit Image
1. Navigate to C:\Program Files (x86)\Dell\CCTK\X86_64.
2. Open the command prompt with administrator privileges.
3. Run the following command: cctk_x86_64_winpe_4.bat C:\winpe_x86_64 C:\Progra~2\Dell
\CCTK
.
4. Navigate to C:\winpe_x86\WIM and burn the ISO image.
Creating Windows PE 4.0 32-Bit Image
1. Navigate to C:\Program Files (x86)\Dell\CCTK\X86.
2. Open the command prompt with administrator privileges.
3. Run the following command: cctk_x86_winpe_4.bat C:\winpe_x86 C:\Progra~1\Dell\CCTK.
11