Release Notes

Issue 11:

Description: On Latitude XT2, the busratio option does not set the argument max.

Issue 12:

Description: When you install CCTK on a Linux system, after installing the omilcore rpm, the following

message is displayed: "To start all installed services without a reboot, enter the following command:

srvadmin-services.sh start".

Resolution: You can ignore the message and can proceed with the installation of other rpms.

Issue 13:

Description: CCTK log file does not capture information related to the sub options of commands.

Issue 14:

Description: On OptiPlex 760, CCTK may allow to set setup and system passwords with number of

characters lesser than what BIOS mandates.

Issue 15:

Description: On Dell Precision Workstation M4400, the bootorder option may not display the correct

number of boot devices.

Issue 16:

Description: On OptiPlex 760, if system password is set, BIOS may not allow to set a setup password. CCTK

does not provide an error message in such a scenario.

Issue 17:

Description: When you upgrade CCTK 1.1 to 1.2.1, CCTK contains the previous version of User's Guide

along with a link to 1.2.1 User's Guide.

Issue 18:

Description: CCTK does not take care of the dependencies among the various TPM PPI tokens. Example: It

is possible to change the TPM PPI ACPI token through CCTK even when TPM is not On. However, there is no

negative impact due to this on the BIOS.

Issue 19:

Description: CCTK allows enabling ‘Legacy Option ROM’ when ‘Secure Boot’ is on. However, there is no

negative impact due to this on the BIOS. This issue will be addressed in the upcoming BIOS version.

Issue 20:

Description: CCTK allows disabling ‘Legacy Option ROM’ when ‘Boot mode’ is Legacy. However, there is no

negative impact due to this on the BIOS. This issue will be addressed in the upcoming BIOS version.

Issue 21:

Description: CCTK allows enabling ‘Secure Boot’ when ‘Legacy Option ROM’ is enabled and boot mode is

UEFI. However, there is no negative impact due to this on the BIOS. This issue will be addressed in the

upcoming BIOS version.