Reference Guide

Example

C:\>cctk --usbwake=enable

usbwake=enable

--uuid

Valid Argument Read-only

Description Reports the UUID for a system. The UUID is a unique system identifier used in PXE

requests.

Example

C:\>cctk --uuid

uuid=4C4C4544-004B-3910-804C-CEC04F463944

--vaconfiglock

Valid Argument unlock, lock

Description Sets the Intel Virtual Appliance Configuration lock.

Example

C:\>cctk --vaconfiglock=unlock

vaconfiglock=unlock

--valsetuppwd

Valid Argument <

password

Description Validates the setup password while setting a value in the BIOS. This is applicable only if

you set a setup password or both setup password and system password.

Example

C:\>cctk --numlock=enable --valsetuppwd=<password>

numlock=enable

--valsyspwd

Valid Argument <

password

Description Validates the system password while setting a value in the BIOS. This is applicable only if

you set a system password and did not set a setup password.

Example

C:\>cctk --numlock=enable --valsyspwd=<password>

numlock=enable

--vaphysicalpresenceconfirm

Valid Argument on, off

Description Sets the VA Physical Presence Confirmation. If set to off, it will allow VA install

application to make virtual appliance configuration changes without rebooting. If set to

on, it forces VA install application to reboot the system to make virtual appliance

configuration.