Reference Guide

--sma

Valid Argument enable, disable

Description Enables or disables the processor sequential memory access.

Example

C:\>cctk --sma=disable

sma=disable

--smartcardreader

Valid Argument enable, disable

Description Enables or disables the smart card reader.

Example

C:\>cctk --smartcardreader=enable

smartcardreader=enable

--smarterrors

Valid Argument enable, disable

Description Enables or disables SMART errors.

Example

C:\>cctk --smarterrors=enable

smarterrors=enable

--snoopfilter

Valid Argument enable, disable

Description Enables or disables the snoop filter option from the system BIOS.

Example

C:\>cctk --snoopfilter=enable

snoopfilter=enable

--speakervol

Valid Argument enable, disable, low, medium, high

Description

Controls the volume of the speaker.

• enable — Enables the built-in speaker. The speaker is enabled at the single

system-supported volume. This should be used only if the Speaker Volume Low/

Medium/High attributes are not supported by the system.

• disable — Disables the built-in speaker.

• low — Sets the volume of the built-in speaker to low.

• medium — Sets the volume of the built-in speakers to medium.

• high — Sets the volume of the built-in speakers to high.

Example

C:\>cctk --speakervol=low

speakervol=low