Reference Guide

--peakshiftcfg

Valid Argument enable, disable

Description

Enables or disables the Peak Shift battery configuration. Using Peak Shift configuration,

you can minimize the consumption of AC power during the peak power usage period of

the day using the enable and disable options. You can set a start and end time for the

Peak Shift period. During this period, the system runs on battery if the battery charge is

above the set battery threshold value. After the Peak Shift period, the system runs on AC

power without charging the battery. The system functions normally using AC power and

recharging the battery after the specified Charge Start Time.

NOTE: To use peakshiftcfg, set the values of Peak Shift Start, Peak

Shift End, Peak Shift Charge Start, and Peak Shift battery

threshold

are necessary. The values must be set in such a way that Peak shift

start time <= Peak shift end time <= Peak shift charge start time.

NOTE: The value of hour must be in the range 0–23 and minute must be 0,15, 30, or

45. To set 12 a.m., provide the hour value as 00.

Example

To enable Peak Shift battery configuration:

C:\>cctk --peakshiftcfg=enable

peakshiftcfg=enable

To enable Peak Shift battery configuration on specific days for a specific period:

C:\>cctk --

peakshiftcfg=enable,mon-10:30/14:00/16:00,tue-10:30/14:00/1

6:30

To disable Peak Shift battery configuration:

C:\>cctk --peakshiftcfg=disable

peakshiftcfg=disable

--penmisindication

Valid Argument enable, disable

Description Enables or disables the missing pen indication. This property is used to control Tablet PC

pen removal. If the pen has been removed out of the retaining well, the pen LED will blink.

Example

C:\>cctk --penmisindication=enable

penmisindication=enable

--penresumeon

Valid Argument enable, disable

Description Enables or disables the resume on pen setting.

Example

C:\>cctk --penresumeon=disable

penresumeon=disable