Reference Guide

Example

C:\>cctk --hdd1fanenable=enable

hdd1fanenable=enable

--hdd2fanenable

Valid Argument enable, disable

Description Enables or disables the error checking on the FAN_HDD2 fan controller.

Example

C:\>cctk --hdd2fanenable=enable

hdd2fanenable=enable

--hdd3fanenable

Valid Argument enable, disable

Description Enables or disables the error checking on the FAN_HDD3 fan controller.

Example

C:\>cctk --hdd3fanenable=enable

hdd3fanenable=enable

--hddacousticmode

Valid Argument bypass, quiet, suggested, performance

Description Sets the hard disk acoustic mode. If set to bypass , BIOS does not modify the currently

set acoustic mode of the hard disks. Quiet sets the acoustic mode of the hard disks to the

quietest operation. Suggested sets the acoustic mode of the hard disks to the setting

suggested by the manufacturer. Performance sets the acoustic mode of the hard disks

for the highest disk performance.

Example

C:\>cctk --hddacousticmode=bypass

hddacousticmode=bypass

--hddfailover

Valid Argument on, off

Description Specifies the devices in the hard disk drive sequence menu that are attempted in the

boot sequence. If set to off, only the first device is attempted in the boot sequence. If set

to on, all devices are attempted as listed in the hard disk drive sequence.

Example

C:\>cctk --hddfailover=on

hddfailover=on

--hddinfo

Valid Argument

Read-only

Description

The option displays the details of the HDD. The information displays the name of the HDD

(HDD Name), whether the HDD is physically present (Present), whether a password

exists for the HDD (Pwd-Protected), whether a reboot is required to set the