Reference Guide

If enabled, when the BIOS boots next time, the first PXE-capable device is inserted as the

first device in the boot sequence. Enabling this value causes this operation on the next

boot only, and does not cause a change in the defined boot sequence of the system. The

BIOS chooses the first PXE-capable device as the onboard network controller of the

system, if present and enabled, or the first bootable network device found in the standard

PCI search order of the system- whichever comes first.

If disabled, the boot override feature is disabled and the system boot sequence is in

effect.

Example

C:\>cctk --forcepxeonnextboot=enable

forcepxeonnextboot=enable

--frontpanelerrdisplaymode

Valid Argument aller, firsterr

Description Configures to report all the errors or only the first error on the front panel LCD.

Example

C:\>cctk --frontpanelerrdisplaymode=aller

frontpanelerrdisplaymode=aller

--frontpanelerrdisplaymode

Valid Argument aller, firsterr

Description Configures to report all the errors or only the first error on the front panel LCD.

Example

C:\>cctk --frontpanelerrdisplaymode=aller

frontpanelerrdisplaymode=aller

--fsboptimize

Valid Argument off, on

Description Enables or disables high bandwidth FSB application optimizations.

Example

C:\>cctk --fsboptimize=off

fsboptimize=off

--genencryption

Valid Argument enable, disable

Description Enables or disables general purpose encryption.

Example

C:\>cctk --genencryption=enable

genencryption=enable

--hdd1fanenable

Valid Argument

enable, disable

Description Enables or disables the error checking on the FAN_HDD1 fan controller.