Reference Guide

--charger

Valid Argument enable, disable

Description

Enables or disables the battery charging system.

NOTE: When the system is turned off, the battery charger is enabled.

Example

C:\>cctk --charger=enable

charger=enable

--chasintrusion

Valid Argument enable, disable, silentenable

Description Enables or disables the system to detect and report chassis intrusion events to the

system display on boot-up.

Example

C:\>cctk --chasintrusion=enable

chasintrusion=enable

--chassisintrustatus

Valid Argument dooropen, tripped, doorclosed, tripreset

Description

Displays the status of chassis intrusion. All the values are read-only except tripreset.

• dooropen — Indicates chassis door is opened.

• tripped — Indicates the chassis door is opened since the last time the sensor

detection logic was reset.

• doorclosed — Indicates chassis door is closed.

• tripreset — Resets the sensor detection logic to detect the next closed-to-open

transition on the chassis door.

Example

C:\>cctk --chassisintrustatus=tripreset

chassisintrustatus=tripreset

--clearsel

Valid Argument yes, no

Description Allows the system to erase or retain the contents of the system event log when the

system boots the next time.

Example

C:\>cctk --clearsel=no

clearsel=no

--cmosdefaults

Valid Argument

enable, disable

Description Enables or disables the request for a default of CMOS values when the system reboots.