Reference Guide

--bootspeed

Valid Argument default, compatible

Description Sets microprocessor speed to default or compatible. If set to compatible, the CPU speed

will be significantly slower. This is implementation dependent. There is no specific speed

for compatible, except that it is significantly slower than default.

Example

C:\>cctk --bootspeed=default

bootspeed=default

--boottimevideo

Valid Argument onboard, addin

Description

Sets the onboard or first add-in video controller for boot time messages.

NOTE: Depending on the BIOS search and system slot layout, the first add-in device

changes.

Example

C:\>cctk --boottimevideo=onboard

boottimevideo=onboard

--busratio

Valid Argument max, 6.0x, 7.0x, 7.5x, 8.0x, 8.5x, 9.0x, 9.5x

Description Sets the bus ratio in CPU.

Example

C:\>cctk --busratio=max

busratio=max

--camera

Valid Argument enable, disable

Description Enables or disables camera.

Example

C:\>cctk --camera=disable

camera=disable

--cellularradio

Valid Argument enable, disable

Description Enables or disables the cellular radio, also called as the WWAN module.

Example

C:\>cctk --cellularradio=disable

cellularradio=disable