Reference Guide

Example

C:\>cctk --amblightsen=enable

amblightsen=enable

--asfmode

Valid Argument on, off, alertonly, dash

Description Sets the alert standard format. The alertonly argument enables only error messages. The

dash argument enables LOM to have both DASH and ASF 2.0 functionality.

Example

C:\>cctk --asfmode=on

asfmode=on

--asset

Valid Argument <

string

Description Reports or sets the customer-programmable asset tag number for a system. The

maximum length of an asset tag is 10 characters. Asset tag values should not contain any

spaces.

Example

C:\>cctk --asset=ASSETTAG

--atgsystem

Valid Argument on, off

Description Sets or removes the CMOS bit to indicate whether the system uses an All Terrain Gear

(ATG) base or not.

Example

C:\>cctk --atgsystem=off

atgsystem=off

--audiomode

Valid Argument disable, halfduplex, fullduplex

Description

Sets the audio mode to any of the following values:

• disable — Completely releases the onboard hardware resources.

• halfduplex — Allows only record or playback at a time.

• fullduplex — Allows record and playback simultaneously.

Example

C:\>cctk --audiomode=halfduplex

audiomode=halfduplex

--autoon

Valid Argument

disable, everyday, weekdays, selectdays

Description

Configures the auto on option for a system. Using this option you can configure the days

on which the system has to turn on automatically.