Reference Guide

NOTE: The value of hour must be in the range 0–23 and minute must be 0,15, 30, or

45.

Example

To enable the advanced battery charging mode:

C:\>cctk --advbatterychargecfg=enable

advbatterychargecfg=enable

To enable the advanced battery charging mode on specific days for a specific period:

C:\>cctk --

advbatterychargecfg=enable,mon-10:00/08:00,tue-13:45/06:00

To disable the advanced battery charging mode:

C:\>cctk --advbatterychargecfg=disable

advbatterychargecfg=disable

--agpaperturesize

Valid Argument 8M, 16M, 32M, 64M, 128M, 256M

Description

Sets the Accelerated Graphics Port (AGP) aperture size of Peripheral Component

Interconnect (PCI) address space.

NOTE: The Extended System Configuration Data (ESCD) must be cleared after the

aperture size is changed.

Example

C:\>cctk --agpaperturesize=8M

agpaperturesize=8M

--agpslot

Valid Argument enable, disable

Description Enables or disables on-board AGP slot.

Example

C:\>cctk --agpslot=enable

agpslot=enable

--alarmresume

Valid Argument enable, disable

Description

Allows or prevents the system to resume from the suspended mode.

• enable — System alarm resumes the system from the suspended mode.

• disable — System alarm prevents the system to resume from the suspend mode.

Example

C:\>cctk --alarmresume=enable

alarmresume=enable

--amblightsen

Valid Argument

enable, disable

Description Enables or disables the ambient light sensor.