Reference Guide

Error Code Message

246

Password operation is not supported on the system.

247

The owner of the system has enabled the Owner Access feature. To set

the Bios configuration, create setup or system password.

248

Either the system hardware or the BIOS version does not support the

option. To resolve the BIOS version issue, upgrade the BIOS to the

latest version.

249

Unable to get password information.

250

Please provide the start and stop values. Example: custom:start-end.

251

The start and stop values should be in the range '%s'.

252

The stop value should be greater than the start value by 5 percentage.

253

The option '%s' is not supported in this machine.

254

Unable to set '%s'. Note: To set this Option Legacy Option

rom(legacyorom) should be enable and secureboot should be disable.

255

Unable to set '%s'. Note: To set this Option bootmode(activebootlist)

should be uefi and legacy option rom (legacyorom) should be disable.

256

Unable to set '%s'. Note: To enable this Option secureboot should be

disable. To disable this Option secureboot should be disable and

bootmode(activebootlist) should be uefi.