Reference Guide

Error Code Message
186
Password is DISABLED by jumper.
187
Error in Validation.
188
Error in Setting the Value.
189
The password length should not exceed the maximum value %s.
190
This is not a Dell machine. CCTK supports only Dell machines.
191
Setup Password is required to change the setting. Use --valsetuppwd to
provide password.
192
System Password is required to change the setting. Use --valsyspwd to
provide password.
193
Password is not Installed. So use only --setuppwd.
194
Password is not Installed. So use only --syspwd.
195
The system password supplied is incorrect. Please try again.
196
The Sequence list must be a comma-separated list of valid unique
device names (ex: hdd, cdrom).
197
The system revision information is not available for this system.
198
The completion code information is not available for this system.
199
The BIOS characteristics information is not available for this system.
200
The password should not contain special characters. Password
characters are limited to alphanumeric (AZ, a-z, 0-9).
201
Please use 64-bit version of this application.
202
%s cannot be modified when TPM is OFF.
203
System password cannot be set when pwdlock option is in locked state
(pwdlock=lock).
204
adddevice option not supported by this machine's BIOS.
205
usb device already present in this machine.
206
Unable to get information from BIOS.
207
%s - Error: Unable to store BIOS information.
208
Duplicate entry found in the input list: %s, Operation Aborted.
209
Typo found in the input list: %s, Operation Aborted.
210
Asset tag can have only printable ASCII characters.
211
Multiple inputs will not be accepted.
212
Invalid Hex format.
213
Hex value range should be 0x0 to 0xffff.
214
%s - Only positive numeric values are acceptable.
215
%s - Length cannot exceed two characters.
90